HP StorageWorks XP Command View Advanced Edition software Device Manager server installation and configuration guide (web version) (T1780-96078, March 2008)

XP Command View AE Suite Common Component
138
The utility program is stored in the following path:
/opt/hitachi/HNTRLib2/bin/hntr2util
To change the size of the trace log files:
1. Log in to the system as root.
2. Execute hntr2util.
A menu appears.
3. From the menu, select Size of a log file.
The submenu appears.
Hitachi Network Objectplaza Trace Library 2 - Configuration Utility
Rel 1.0
Type new file size [8-4096] (Type '!' to return)
Current Size(KB): 256
New Size(KB):
4. In the submenu, enter the desired size for trace log files, and then press Enter. If you do not
want to change the size, enter !, and then press Enter.
5. Check the contents you specified, enter e, and then press Enter.
A message appears to check if you want to save the changes.
6. Enter y to save your changes or enter n to exit without saving your changes.
5-4 Ports used by XP Command View AE Suite
Common Component
This section describes the ports used by Device Manager and XP Command View AE Suite
Common Component, and how to change them.
5-4-1 Ports used by the Device Manager server and
Common Component
Table 5-3 lists the ports used by the Device Manager server and Common Component.
Table 5-3
The Device Manager server and Common Component ports
Component Network Port Description
2001/tcp Used by the Device Manager HTTP (web) server to
communicate with web client and the Device Manager agent.
You can change the port using the server.http.port
property. For details, see subsection
8-2-2 ).
snmp:161/udp May be used for SNMP in the future. If another application is
using this port, use caution when you upgrade Device
Manager.
snmptrap:162/ud
p
Used for receiving SNMP traps from the disk array(s).
Device Manager
server
2443/tcp Used by the Device Manager server to use SSL-based
communication with Device Manager CLI, web client, and the
Device Manager agent. You can change this port by
modifying the server.https.port property. For details,
see subsection 8-2-3 .