HP StorageWorks XP Command View Advanced Edition software Device Manager server installation and configuration guide (web version) (T1780-96078, March 2008)

XP Command View AE Suite Common Component
165
2
The IP address is displayed only when XP1024/XP128 is launched from Physical View (output example:
loid=10.208.110.110).
The following examples show message text output when the server receives a launch request
(when no error has occurred) or sends a response to a launch request (when no error has
occurred).
Example of message text output when the server receives a launch request (when no error has
occurred):
"123456789 lsessionID=a7e770671b8 loid=R500-14000"
Example of message text output when the server sends a response to a launch request (when no
error has occurred):
"123456789 lsessionID=a7e770671b8"
5-9-5-4 When output as processing results of Device Manager server via CIM
When a CIM service method request is received or a response is transmitted, information on the
request or response is output in the message text. The message text format is described below,
followed by a detailed description of the information contained in the message text.
Request reception (normal):
unique-ID method-name input-parameter object-path
Response transmission (normal and abnormal):
unique-ID return-code output-parameter
Response transmission (when a job is created through asynchronous processing):
unique-ID return=4096 object-path
CAUTION: When a job is created through asynchronous processing, no completion notification is
output to the audit log data.
Table 5-14 Information output when a Device Manager server request is received (via
CIM) or a response is transmitted
Item Description
Unique ID A unique request identifier. For response transmission, the unique ID
of the request is output. For processing via the SVP, this identifier is
also output to the audit log data on the SVP.
Method name The name of the requested method.
Input parameters
Format: inParams={...}
The input parameters passed to the requested method are output.
Object path
Format: objectPath=...
The object path passed to the requested method is output.
Return code
Format: return=...
The return code that indicates the execution result of the requested
method is output.
Output parameters
Format: outParams={...}
The output parameters passed as the execution result of the
requested method are output.
The following examples show message text output when the server receives a request for Device
Manager server processing (via CIM, when no error has occurred) or sends a response (via CIM,
when no error has occurred).
Example of message text output when the server receives a server receives a request for Device
Manager server processing (via CIM, when no error has occurred):