HP StorageWorks XP Command View Advanced Edition software Device Manager server installation and configuration guide (web version) (T1780-96078, March 2008)

Device Manager server properties
197
8-2-26 server.cim.support.job
This property specifies whether a method for creating or deleting a volume, setting or releasing a
path, setting or canceling security for a LUN, or creating or deleting a LUSE volume is executed
asynchronously or synchronously. If you set this property to true, the method is executed
asynchronously. If you set this property to false, the method is executed synchronously. If the CIM
client does not support the job control subprofile, specify false.
If you specify any values other than true or false, or if this property does not exist, the method is
executed asynchronously.
Default: true
8-2-27 server.cim.support.protocol
This property sets whether to open or close the ports used by the CIM function. A value of 1 to 3
can be specified. When 1 is specified, the port for non-SSL transmission is opened and the port for
SSL transmission is closed. When 2 is specified, the port for non-SSL transmission is closed and
the port for SSL transmission is opened. When 3 is specified, both ports are opened.
If you decide not to use SSL when Device Manager is newly installed, 1 is set. If you select to use
SSL, 3 is set.
Default: 3
8-2-28 server.cim.http.port
This property specifies HITACHI_ObjectManager.Name as the port for the CIM function if SSL is
disabled.
Default: 5988
8-2-29 server.cim.https.port
This property specifies HITACHI_ObjectManager.Name as the port for the CIM function if SSL is
enabled.
Default: 5989
8-2-30 server.configchange.enabled
This property determines whether to enable the automatic refresh function. This function
automatically performs a refresh when the Device Manager server detects that the system
configuration has been changed by the launched disk array management tool (for example, XP
Remote Web Console). To enable this function, set this property to true.
Default: true
8-2-31 server.configchange.autorefresh.lastrefreshed
This property specifies whether the time of the last refresh is to be updated during an automatic
refresh. (The time of the last refresh is always updated during a manual refresh, but this is an
optional setting for an automatic refresh.) To specify that the time of the last refresh is to be updated
during an automatic refresh, set this property to true.
Default: true