HP StorageWorks XP Command View Advanced Edition software Device Manager server installation and configuration guide (web version) (T1780-96078, March 2008)

Windows systems installation

of XP Command View AE Suite products whose versions are earlier than 5.7 are not

stopped automatically.

CAUTION: You must not execute multiple instances of this command concurrently. Also, you

must not execute this command and the cvxpaegetlogs command concurrently.

CAUTION: For details about how to set the port that HiRDB uses, see subsection

5-4-2 .

10. If Common Component is running, execute the following command to stop it:

<common component installation folder>\bin\hcmdssrv /stop

11. Open the Windows Services screen. Open the property, and then change Startup Type from

Automatic to Manual:

○ HBase Storage Mgmt Common Service

○ HBase Storage Mgmt Web Service

○ DeviceManagerServer

3-3-3-2 Installing on the standby node

NOTE: Do not stop the Common Component services while another XP Command View AE Suite

program is running.

1. On the standby node, perform a new installation of the Device Manager server (see

subsection

3-2-2 ). Requirements for installation are as follows:

○ In the Choose Install Folder dialog box, specify the same installation path as that on the

executing node.

○ In the Choose the Database for XP Command View AE Suite Common Component dialog

box and the Choose the Database for Device Manager dialog box, do not change the

default database storage destination folders.

○ In the Installation Server Information Settings screen, specify a logical host name for the IP

address of the Device Manager server.

A logical host name indicates the name of a virtual host allocated to the cluster

management IP address.

2. After the Device Manager server is installed on the standby node, enter the license key by

using web client. For more information on using web client, see the HP StorageWorks XP

Command View Advanced Edition software Device Manager user guide.

Use the IP address of the standby node to access the Device Manager server.

NOTE: You should have received a CD that contains the Device Manager License Key. You

should upload the License Key file to a folder on the same server where Device Manager will be

installed. That way, you can browse for the License Key file. Once the file is found, simply

highlight the file and select the Open button. This will update Device Manager with the permanent

License Key.

3. Use a text editor to create a cluster configuration file.

The items to be specified in the cluster configuration file containing the following entries:

○ mode: Specify standby.

○ virtualhost: Specify the logical host name.

○ onlinehost: Specify the host name of the executing node.

○ standbyhost: Specify the host name of the standby node.