HP XP P9000 Replication Manager Software 7.6.0-00 Application Agent CLI Reference Guide

or restoration failures. The items, volumes, and conditions to be checked are described in the following
table.
Table 7 Status check of a secondary volume
Check condition
Volume to be
checked
Check item
Checked when a primary volume is defined in pairs with
secondary volumes of multiple generations and any of the
following items is applicable:
• A primary volume is a cluster resource.
• A primary volume is a dynamic disk.
• A backup by using VSS is performed.
All secondary
volumes defined for
a backup-target
primary volume
A secondary volume
is hidden from a
backup server
Always checked.
The secondary
volume to be the next
backup destination
A secondary volume
is not mounted on a
backup server
NOTE:
Each piece of backup information in the backup catalog is managed by using a copy group as a
key. Depending on the backup method, you might not be able to perform a restoration, even though
the backup data exists on the secondary volume.
For notes on using Application Agent, see the HP P9000 Replication Manager Software Application
Agent CLI User Guide .
Return Values
0: Normal termination
Any value other than 0: Termination with an error
Conditions Causing an Error
This extended command fails in the following cases:
• An invalid option is specified.
• The system cannot acquire information from the definition file linked to the operation ID.
• A specified Application Agent command option cannot be specified as an extended command
option.
• The system fails to record a backup ID in the backup ID record file.
• A command executed inside the extended command encounters an error.
• Information cannot be acquired from the host environment settings file.
• No storage directory for extended-command temporary files is specified in the operation definition
file.
• The command fails to obtain the name of the directory where dictionary map files are stored.
Examples
• In this example, the extended command is used to back up the file system specified by the operation
ID operation01 to the secondary volume, using the cold backup method:
Application Agent CLI Reference Guide 19