HP XP7 Command View Advanced Edition Mainframe Agent Installation and Configuration Guide (TK981-96005, May 2014)

Explanation and actionsMessage textMessage ID
The XP7 mainframe agent terminated abnormally.
If the cause is unknown, collect the ABEND dump in the
SYSABEND dump format and then contact customer support
for investigation.
AGENT ABENDEDYKY053I CON
The MODIFY command was accepted.
MODIFY COMMAND
ACCEPTED
YKY100I CON
The STOP command was accepted.
STOP COMMAND AC-
CEPTED
YKY101I CON
After an entry of the MODIFY command, an error was
detected in the command or operand shown as text.
Check, and, if necessary, revise the command.
error-type
• COMMAND: Indicates that an error was detected in the
command.
• OPERAND: Indicates that an error was detected in the
operand.
INVALID error-type: textYKY102I CON
The entered command has a syntax error.
Check, and, if necessary, revise the command.
COMMAND SYNTAX
ERROR
YKY103I CON
The specified operand is invalid.
Correct the error and then re-enter the operand.
OPERAND IS INCOR-
RECT
YKY104I CON
The value of the initialization parameter has been changed.
The parameter name is given in parameter-name.
parameter-name
WAS CHANGED
YKY111I CON
This message displays the current value of the initialization
parameter.
parameter-name
Initialization parameter name
parameter-value
Initialization parameter value
parameter-name=para-
meter-value
YKY114I CON
This message displays the TCP/IP session number. This
message is followed by the TCP/IP session information.
session-number
Session identification number
SESSION NO.=session-
number
YKY130I CON
Installation and Configuration Guide 81