HP XP7 Command View Advanced Edition Mainframe Agent Installation and Configuration Guide (TK981-96005, May 2014)

Explanation and actionsMessage textMessage ID
An I/O error occurred. Processing will continue with this
device skipped.
If a sense byte is set, the sense byte is indicated in the
YKZ255E message.
When CC=3:
The corresponding device might not be configured or
connected.
When CC=0 and CSW=xxxxxx0000xxxx (DSB=00,
CSB=00):
The corresponding device might not be configured or
connected.
When CC=0 and CSW=0000000006xxxx where x indic-
ates a value:
MIH might have occurred or a logical path might not
be connected.
device-number-1 (string)
The device that issued I/O
device-number-2 (string)
The device to be manipulated
If the device number of the device to be operated is
not found, **** is displayed.
code1 (decimal number)
CC information
code2 (Hexadecimal number)
CSW information
code3 (Hexadecimal number)
Subcommand code
code4 (Hexadecimal number)
Completion code
code5 (Hexadecimal number)
Detailed code
xxx (decimal number)
Command code of the command that was executing
when the error occurred
See the command code description in the explanation
of the YKZ201E message.
yyy (string)
Maintenance information
pair-index
Copy group number and copy pair number
DASD device
device-number-1
(device-number-2)
I/O error. (CC=code1
CSW=
code2 code3 code4
code5, cmd=xxx,
pos=yyy).
YKZ253E TSO
SC=32 (pair-in-
dex)
Messages98