HP XP7 Command View Advanced Edition Mainframe Agent Installation and Configuration Guide (TK981-96005, May 2014)

Explanation and actionsMessage textMessage ID
An I/O error occurred. XP7 mainframe agent might not
support this device. Processing will continue with this device
skipped.
If a sense byte is set, the sense byte is indicated in the
YKZ256E message.
When CC=3:
The corresponding device might not be configured or
connected.
When CC=0 and CSW=xxxxxx0000xxxx (DSB=00,
CSB=00):
The corresponding device might not be configured or
connected.
When CC=0 and CSW=00000000060000:
MIH might have occurred or a logical path might not
be connected.
device-number-1 (string)
The device that issued I/O
device-number-2 (string)
The device to be manipulated
code1 (decimal number)
CC Information
code2 (Hexadecimal number)
CSW Information
code3 (Hexadecimal number)
Subcommand code
code4 (Hexadecimal number)
Completion code
code5 (Hexadecimal number)
Detailed code
xxx (decimal number)
Command code of the command that was executing
when the error occurred
See the command code description in the explanation
of the YKZ201E message.
yyy (string)
Maintenance information
DASD device
device-number-1
(device-number-2)
I/O error. (CC=code1
CSW=
code2 code3 code4
code5, cmd=xxx,
pos=yyy).
YKZ254E TSO SC=8
Installation and Configuration Guide 99