Cloud bursting with HP CloudSystem Matrix infrastructure orchestration and Savvis

VPN addresses are assigned by Savvis. You cannot specify the range or address block of the VPN.
A VPN is required to access a provisioned VM using remote desktop or SSH.
Upload a Client Provided Image (CPI) to Savvis
Savvis enables you to upload Open Virtualization Format (OVF) images to a selected VPDC site and use it as a
Custom vServer Template to build vServers in the VPDCs. These custom images are stored in an Image Library, which
is available across all of the VPDCs at that site.
1. In the Symphony VPDC: Overview page, click on the Upload New Image link in the upper left-hand corner of
screen under Shortcuts or under the My Tasks section.
2. On the Upload New Image screen, select the Billing Site/Department and Location from the pull down
menus.
IMPORTANT Using CloudSystem Matrix with Savvis requires client-provided images uploaded to Savvis. See
the Symphony VPDC User Guide for detailed client image preparation guidelines. It is the customer‟s
responsibility to verify with Savvis the specific requirements for the images that can be deployed to Savvis.
IMPORTANT Network connectivity depends on the service profile of the VPDC created in Savvis.
If you create a VPDC with an Essential service profile, a VPN is not required; however, VMs created in Essential
VPDCs are available on the public internet. You can only access the VM over the public internet.
If you create a VPDC with a Balanced or Premier service profile, you must create a VPN connection to access
the VM. (You do not need a VPN connection to provision the VM.) Savvis DHCP servers serve IP addresses to
VMs in these VPDCs, and Matrix can find and display these IP addresses. The VMs are accessible via these IP
addresses only over the VPN connection.