HP Insight Management 7.3 Installation and Configuration Guide

Step 5: Installing from HP Insight Management DVD #2
The HP Insight Management DVD #2 Selection screen appears when you are installing or upgrading
products or components that reside on DVD #2. You can either use the same drive and replace
disks as needed or you can specify an alternate drive. If you specify a network drive, you must
temporarily set the Internet Explorer security level for the Trusted Sites zone (Tools→Internet
Options→Security→Sites) to Low.
Figure 7 HP Insight Management DVD #2 Selection
1. To specify the location of the HP Insight Management DVD:
• (Recommended) To manually replace HP Insight Management DVD #1 with HP Insight
Management DVD #2 when prompted, select Replace DVD #1 by DVD #2 in the drive
during the installation process.
• To automatically access each DVD if you want to use multiple DVD drives, enter the
location of DVD #2 in the Specify an alternate drive for DVD #2 box, or click Browse to
search for the DVD.
2. Click Next.
NOTE: If you are using an ISO mounting utility and selected Replace DVD #1 by DVD #2 in the
drive during the installation process, either remount the ISO image after reboot or configure the
ISO mounting utility to automatically remount the images.
Step 6: Viewing the prerequisites
The Check for prerequisites screen lists the prerequisites for successful installation of HP Insight
Management. Your system must meet all these prerequisites, which are based on the components
20 Installing or upgrading HP Insight Management