HP Insight Management 7.3 Installation and Configuration Guide

Only Microsoft Proxy Server is tested and supported, and only basic authentication for Internet
proxy servers is supported. The use of Internet proxy server scripts and full NTLM authentication
are not supported.
The Insight Management Update utility accesses the HP website and compares the version numbers
of the installed software with the version numbers of the latest available software. If your environment
requires proxy settings and they are not set, this task fails.
Figure 13 Proxy configuration (optional)
1. If your network requires a proxy server to access the Internet, select I use an HTTP proxy server,
and then enter the proxy host and proxy port information.
NOTE: HP Insight Management Installer supports IPv4 as a valid IP address.
2. (Optional) My proxy requires authentication is only available when I use an HTTP proxy server
is selected. If My proxy requires authentication is selected, enter the proxy user name and
proxy password.
NOTE: When installing or upgrading on a Japanese operating system, use Roman characters
for all user name, password, and installation path fields.
3. Click Next.
NOTE: These proxy settings are specific to the Insight Management upgrade scenario. Some
Insight Management components might be affected by a system-wide proxy configuration (configured
in Internet Explorer Proxy Settings). For example, if you are using Insight Control server deployment,
and Internet Explorer on the CMS is configured to access the Internet using a proxy server, check
Bypass proxy server for local addresses and include the IP address of the deployment server in the
Exceptions field of the Advanced options in the Internet Explorer proxy configuration.
Step 12: Setting a proxy configuration 27