HP Insight Management 7.3 Installation and Configuration Guide

Step 13: Setting Product title configuration
The Product title configuration (optional) screen enables you to customize the default product title
displayed on the login screen.
The product title configuration screen is displayed only when HP SIM is selected during installation.
The values entered as part of the banner settings in the Product title configuration page are updated
in the globalsettings.props file.
To change the default product title screen, select the Change the product title and enter values in
the title and subtitle text boxes.
If you clear the Change the product title check box, the current values in the text boxes are replaced
by default values based on the components selected.
Figure 14 Product title configuration (optional)
Table 7 Banner setting behavior
ImplementationCheck box statusScenario
Text box values are set to default, based on
the components selected.
Check box is cleared by default.Fresh Installation
Text box values are set to current banner
settings.
Check box is selected by default.Upgrade/Reuse of HP SIM
The values entered in the text boxes are
retained.
User selects the check box.User changes the component
selection
The text box values are set based on the
components selected.
User clears the check box.User changes the component
selection
A popup message is displayed indicating that
the values entered by the user will be lost.
User clears the check boxUser enters data in the text
boxes, in case of HP SIM
upgrade/reuse
1. Click OK to uncheck the checkbox.
2. Click Cancel to retain the checkbox
selection.
28 Installing or upgrading HP Insight Management