HP Insight Management 7.3 Installation and Configuration Guide

Procedure 1 To specify a non-default port:
1. Select Specify HTTPS port.
2. Enter a port number in the HTTPS Port field. The standard port number is within the range 1 -
65535.
3. Click Next.
Step 17: Selecting the sub-range addresses for HP Virtual Connect
Enterprise Manager
In the VCEM Range Selection screen, you must select one of the 128 sub-range addresses for both
MAC and WWN, only if you are planning to install multiple instances of CMS under the same
administration. This prevents the different VCEM instances from using MACs/WWNs which belong
to other VCEM instances. This also results in automatic creation of VCEM exclusion ranges for
MACs/WWNs which do not belong to a particular VCEM instance.
For more information on sub-range addresses, see the HP Virtual Connect Enterprise Manager User
Guide.
Figure 16 VCEM Range Selection
In the VCEM Range Selection screen, the option to select the I (will) use multiple CMS checkbox is
available. By default, the checkbox is not selected, and the range selection part of the screen is
disabled. To enable the range selection for both MAC and WWN, select the checkbox.
If the checkbox is selected, range 1 is assigned by default to both MAC and WWN respectively.
30 Installing or upgrading HP Insight Management