HP Insight Management 7.3 Installation and Configuration Guide

NOTE: Users with operator, user, or none template rights can only view and modify the
Graph and Analysis Settings configuration of the Insight Control power management Options
page.
• Temperature Unit of Measurement. Select a unit of measurement for the temperature from
the list. This setting is user-specific.
• Power Unit of Measurement. Select a unit of measurement for power.
• Use GMT for all timestamps in the graphs. Select this option to use Greenwich Mean Time
(GMT) when graphing data.
• Cost of Power per kWh. Enter the average cost of power per kilowatt-hour. This calculates
the cost of operation for the system and cooling. For ease of data entry, only one field is
provided. Use the Export option in the Power Management Actions section of the graphs
if more cost analysis is required. This field is used to calculate the cost and annual cost
of operation for the system and cooling.
• Currency Type. Enter the currency type. This option controls the display of cost information
in the Analysis section of graphs. The default value is USD. You can specify $, EUR, €,
GBP, £, ITL, £, JPY, ¥ or any other printable character set.
• Cooling Multiplier. Enter a cooling multiplier. This value represents the relative cost of
cooling the system compared to the cost of powering the system. The default value of 1.5
indicates that it costs 1.5 as much to cool the system as it does to power the system. This
value is multiplied by the kilowatt-hours used by the system to obtain the cooling
kilowatt-hours that are used in the Analysis section of graphs that display power
consumption.
• Power Line Voltage. Select the power line voltage. This option calculates the consumed
amperage that is displayed in the Power/Thermal Analysis views and Analysis section
of graphs.
NOTE: The Power Unit of Measurement, Use GMT for all timestamps in the graphs, Cost of
Power per kWh, Currency Type, Cooling Multiplier, and Power Line Voltage options are set
for each user and the settings can vary from one user to another.
5. The rated capacity of a power delivery device is the absolute maximum load supported by
the device in amperes. In some localities, electrical codes dictate that only a percentage of
this rated capacity can be utilized to satisfy a continuous load. The default Derating Percentage
identifies the portion of the rated capacity of a power delivery device that must be reserved
when calculating the maximum continuous load supported by a power delivery device. Insight
Control power management utilizes this value to calculate the maximum usable power capacity
of the power delivery device. You can select one of the following:
• NA/JP. Select this if you are managing systems in North America or Japan which require
a derating of 20%. This is the default option.
• None. Select this if no derating is required in your locality.
• Custom. Select this to specify a custom derating percentage other than 20%.
NOTE: Users with operator, user, or none template rights can only view and modify the
Derating Percentage configuration of the Insight Control power management Options page.
6. Default Integrated Lights Out (iLO) Settings enable you to configure a Secure Socket Layer
(SSL) port number. For the Default SSL Port option, enter the SSL port number to be used by
power management to communicate with iLO. The default is 443. The port number of power
management and any iLO that the power management communicates with, should be same.
56 Optional post-installation configuration