HP Insight Virtualization Manager with Logical Server Management 6.1 User Guide

You can optionally save the storage entry details you enter on this screen into a storage pool
entry that can be shared by other logical servers.
IMPORTANT: If you configure your Virtual Connect logical server to use a local disk, you
cannot move that logical server. Additionally, after you activate the logical server, you cannot
reactivate it on a different system.
Perform the following steps to define a SAN or RDM storage entry.
1. Enter the “SAN storage entry definition” (page 72)
2. Enter the “Port definition” (page 72)
3. Enter the “Volume and path definition” (page 73)
4. Optional: Verify “Validation status” (page 74)
SAN storage entry definition
1. Optional: Change the name of the storage entry by typing in the name box. Each storage
entry is given a unique default name.
2. Optional: Enter a description for the storage entry. If you enter a description and insert the
entry into the storage pool, it is displayed in the Select Pool Entry drop-down menu on
the Modify Storage Configuration tab and the Create Storage Configuration screen.
3. Optional: Change the Maximum Number of Sharers (maximum number of logical servers
that will be allowed to share this storage entry), then click Update Maximum Sharers.
As logical servers share this storage entry, they are assigned one specific server WWN per
port.
4. Optional: Check the Insert Storage Entry into Pool checkbox if you want to save the
storage entry details that you enter on this screen as a storage pool entry.
After inserting the storage entry into the pool, you can view (but not modify) the entry by
pressing View in the Actions column of the Storage Assignments table on the Create:
Storage Configuration screen. If you create a storage entry and add it to a storage pool, you
can modify the storage pool entry only using the Modify→Logical Server Storage Pools...
menu selection.
If you create a storage entry and do not check Insert Storage Entry into Pool, you can later
modify the storage entry using the Modify button on the Create: Storage Configuration
screen.
Figure 6-4 Create logical server SAN storage definition
Port definition
The Port Selection table allows you to define the ports that can be used to access the volume
selections for this logical server.
Any communication with SAN storage starts with the server’s Fibre Channel ports. Ports are
added in sequential order. For each port, you must select the fabric from a drop-down menu
72 Defining storage for logical servers