HP Integrity Virtual Server Manager 6.3 User Guide

Figure 10 VSP view General tab
1
The “VSP General tab” (page 28) displays information about the VSP system.
2
The “VSP Virtual Servers tab” (page 31) displays information about the state of VMs or vPars
in the VSP system.
3
The “VSP Virtual Switches tab” (page 33) shows information about the virtual switches on the
VSP.
4
The “VSP Network tab” (page 34) shows all mappings from virtual network interface cards
in the VMs or vPars to the physical network interface cards in the VSP system.
5
The “VSP Storage tab” (page 42) shows all mappings from the virtual storage devices in the
VMs or vPars to the physical storage devices in the VSP system.
6
The “VSP Console tab” (page 49) displays the screen through which you can open a iLO
console terminal or a virtual iLO remote console terminal based on your privileges.
7
The “VSP GUID Resources tab” (page 49) displays the screen through which you can create,
modify, or delete World Wide Number (WWN) ranges.
8
The “DIO Pool tab” (page 51) displays the screen through which you can create or modify
the properties of DIO owned by the host or HPVM.
VSP General tab
The VSP General tab displays information about the overall state and configuration of the VSP
system.
28 Using Integrity Virtual Server Manager views and tabs