HP Integrity Virtual Server Manager 6.3 User Guide

Table 11 Integrity Virtual Server Manager Modify menu options (continued)
Action SummaryMenu Selection
This menu is enabled only for VMs.Modify→CPU Entitlement for VM...
This menu is enabled only for VMs.Modify→Hardware Auto Start for VM...
Adds DIO to VM or vPar.Modify→Add DIO...
Replaces the h/w path of a DIO owned by a VM or a vPar.Modify→Replace DIO H/W Path...
Replaces the MAC address of DIOs owned by a VM or a
vPar.
Modify→Replace DIO MAC Address...
Sets and changes WBEM credentials for VMs or vPars. For
information, see “Setting WBEM credentials in HP SMH”
(page 16). This menu is available only when using Integrity
Virtual Server Manager with HP SMH.
Modify→WBEM Credentials...
Modifies a shared VM type to a vPar, and a vPar to a
shared VM type using the guest type option.
Modify→Guest Type...
Enables Migration between Itanium 9300 and Itanium 9500
based systems for the selected VM.
Modify→Online Migration between Itanium 9300 and
Itanium 9500...
Using the Delete menu
The Delete menu allows you to delete one or more VMs or vPars, virtual switches, or I/O devices.
Figure 57 shows the choices that might be available when you select the Delete menu. The choices
are enabled according to the view and tab. In Figure 57, the Virtual Machine... option is enabled
and the Virtual Switch... and I/O Device... options are disabled. The Virtual Machine... option is
enabled at the VM Properties view or any VSP or Vswitch Properties tab where you have selected
one or more VMs (such as the VSP Virtual Servers tab, as shown in Figure 57). The Virtual Switch...
option is enabled at the Vswitch Properties view or any VSP or VM Properties tab where one or
more virtual switches are selected. The I/O Device... option is enabled at any Network or Storage
tab where one or more I/O devices are selected.
From tabs that list and allow selection of multiple VMs or vPars, virtual switches, or I/O devices,
you can simultaneously delete all selected objects.
Using the Delete menu 79