HP Storage Provisioning Manager (SPM) Version 1.2 User Guide

To view and modify the connectivity settings of an unmanaged array:
1. From the Navigation tree, select Arrays.
The list of arrays appears in the List View pane.
2. From the List View pane, select the appropriate array.
3. Select the Actions Properties button. (Alternatively, right-click the array and select Properties.)
The Array Properties dialog box appears.
4. To add array connectivity settings on an unmanaged array:
a. Click the Connectivity tab.
b. Click Add at the bottom of the dialog box.
A default entry appears in the connectivity table. It is highlighted in blue.
c. Click on the new default entry.
d. Enter the preferred controller name in the Controller Name field.
e. Enter the preferred port name in the Port Name field.
f. Select the Storage Port Type from the list.
g. Enter the correct value into the Port ID field.
h. Select the network or SAN from the SAN/Network Connectivity list.
5. To add array connectivity settings on a managed array, select the network or SAN from the
SAN/Network Connectivity list.
6. To modify array connectivity settings on an unmanaged array:
a. Click on the appropriate entry in the connectivity table.
b. Change the controller name by typing the preferred name in the Controller Name field.
c. Change the port name by typing the preferred port name in the Port Name field.
d. Change the port type by selecting the Storage Port Type from the list.
e. Change the port ID by typing the correct value into the Port ID field.
f. Change the network or SAN by selecting the setting from the SAN/Network Connectivity
list.
7. To modify array connectivity settings on a managed array, change the network or SAN by
selecting the setting from the SAN/Network Connectivity list.
8. To delete connectivity settings:
a. Click on the settings entry to be deleted, which highlights the entry in blue.
b. Click Remove.
9. Click OK to save the modifications and close the dialog box.
HP Storage Provisioning Manager (SPM) Version 1.2 User Guide 43