"Using HP ProLiant Network Teaming Software with Microsoft® Windows® Server 2008 Hyper-V or with Microsoft® Windows® Server 2008 Hyper-V R2" HOWTO, 4th edition

5
Creating an HP Network Team
Once you have installed the HP Network Configuration Utility, a network team may not be created if
you selected any of the network interfaces to be configured as part of a team under HP Network
Configuration Utility during the installation of Hyper-V. To create an HP Network Team, proceed as
follows.
1. If any network interfaces were selected during the installation of Hyper-V, remove them from the
Virtual Network Manager: Select the interface in the left hand navigation screen and click the
remove button.
2. Once you have removed all intended network interfaces from the navigation window, click OK to
apply the changes. A confirmation pop-up will appear to confirm the changes to the Microsoft
Virtual Network; click Yes to continue.
3. With the installation of Hyper-V, Microsoft installs and binds the Microsoft Virtual Network Switch
Protocol to the network interfaces. You must de-select this in the properties window for each
network interface to be configured as part of a team in HP Network Configuration Utility.