HP StorageWorks EVA replication software consolidated release notes XCS 5.1x (T3687-96077, April 2006)
Commands hang
on HP-UX hosts
Symptom: Whe
n a device is in the failed state (due to a controller being down) and the HP-UX host is
obtaining th
e d evice information, the host a gent hangs during commands such as bdf, diskinfo,and
insf. This may occur on an HP-UX 11.11 or 11.23 host.
Resolution: Reboot the HP-UX host.
Sun Solaris host agent
There is a conflict bet ween the cfgadm utility and the SNIA libraries that are distributed with HP Secure
Path 3.0d SP1 on Solaris 10, which prevents the Solaris 10 host from working properly.
Resolution: Install the 119974 path on the Solaris 10 host before installing the SNIA libraries.
HP O penVMS h
ost agent
SNIA libraries
The following SNIA libraries are required on the H P OpenVMS host to ensure that the host agent software
works properly:
•
HBA_VMS.EXE
•
LIBHBAAPI.EXE
These SNIA libraries are included on the host agent soft ware CD. Compare the versions of the libraries
on the CD against those listed in SYS$LIBRARY. If the versions on the CD are newer, copy the SNIA
libraries from the CD to SYS$LIBRARY and then restart the host ag ent.
Host agent log file is locked
The HP OpenVMS host agent process locks the log file so it cannot be edited.
Resolution: To remove the lock, do either of the following:
• Enter the following command to stop the host agent process:
@sys$st
artup:rsmha$shutdown
This command stops the host agent in a coordinated, safe way. You can then access the log fi le.
• Enter the following command to b ack up the log file to another file:
"$ backu
p/ignore=interlock rms$path:[rsmha.logs]RSMHA_RG1V08-060208-
1.LOG newfilename.log"
Acopyofthelogfile co ntents is placed in the file name you specify. You can now edit the
contents of the log file.
Specifying mount points for an HP O penVMS host agent
When executing the MountHostVolume job on a HP OpenVMS host, the Mount Point specification may
cause a n error. If you leave the Mount Point box blank, the HP OpenVMS host agent rea ds the disk label
and attempts to mount the volume with the existing label. If you specify a name, the HP OpenVMS host
agent changes the disk label to the specified name and attempts to mount the volume. In either case, if
the job fails, an error is returned to the server.
Wind
ows host agent
Windows host agent cannot authenticate an Oracle 9i database
After installing an Oracle 9i database on a Windows host, the Oracle database is seen in the GUI
but it cannot be authenticated.
HP StorageWorks EVA replication software consolidated release notes
23