HP P6000 Replication Solutions Manager User Guide (T3680-96089, October 2012)

3. Select Actions > Add Presentation.
The Add Presentations window opens.
4. Follow the instructions in the window.
Removing virtual disks from a managed set
Remove virtual disks from a managed set.
Considerations
You can use the GUI or the CLUI. See Storage systems actions cross reference.
Procedure
This procedure uses the GUI.
1. In the navigation pane, select Virtual Disks.
2. On the List tab, select the virtual disks to remove from a managed set.
3. Select Actions > Remove From Managed Set.
The Select Managed Sets window opens.
4. Select the managed set from which to remove the virtual disks.
5. Click OK.
The virtual disks are removed from the set.
Removing virtual disks from a DR group pair
Remove virtual disks from a DR group pair. See DR group pair.
When you remove virtual disks from a source DR group, the source disks are retained. You can
discard or retain the remote copies (virtual disks).
Considerations
You can use the GUI or CLUI. See Virtual disks actions cross reference.
Guidelines apply. See virtual disks Remote replication guidelines.
To remove virtual disks from a DR group pair, you must specify virtual disks in the source DR
group. See DR group pair.
You cannot directly remove virtual disks from a destination DR group.
If you choose to discard the remote copies when the remote link is not operational, the remote
virtual disks are not deleted. You must delete them manually.
You cannot remove virtual disks from a DR group pair if remote replication is suspended. See
DR group Suspension state.
You cannot remove a virtual disk from a DR group if its remote copy is presented. You must
first unpresent the remote copy. Procedure
CAUTION: If you discard a remote copy, the destination virtual disk and its data are deleted.
Procedure
This procedure uses the GUI.
1. In the navigation pane, select Virtual Disks.
2. On the List tab, select the source virtual disks you want to remove from a DR group pair.
252 Virtual disks