HP P6000 Replication Solutions Manager CLI Reference (T3680-96071, June 2012)

Performs a manual refresh of the snapshot properties prior to other operations that
were specified in this command.
refresh
Displays the replication properties for the snapshot.replication
Displays properties about the specified snapshot.snapshot name
SHOW SYSTEM
The SHOW SYSTEM command displays the properties of the selected array.
Syntax
sho[w] sys[tem] <system name>
[disk_g[roups]|dg]
[enabled_host|eh]
[f[ull]]
[l[ist]]
[man[aged_set_member]|ms_member|msm]
Switches
Displays information about the selected array's disk groups.disk_groups
Lists the enabled hosts (EVA hosts) names that display in HP P6000 Command View
for the selected storage system for presentation and unpresentation of virtual disks.
enabled_host
Ensure the system is selected using the SELECT SYSTEM command before using
this switch.
When used instead of system name, displays details about all arrays.full
Displays a simple list of array names. This is the default output if full or system
name are not specified.
list
Displays the managed sets of which each array is a member.managed_set_member
Displays properties about the specified array.system name
SHOW VDISK
The SHOW VDISK command displays the properties of virtual disks. Select an array before using
this command.
Syntax
sho[w] vd[isk] <vdisk name>
[f[ull]]
[l[ist]]
[man[aged_set_member]|ms_member|msm]
[pres[entation]]
[refresh]
[repl[ication]]
Switches
When used instead of the vdisk name, displays details about all virtual disks on
the array.
full
Displays a simple list of virtual disks names. This is the default output if full or
vdisk name are not specified.
list
Displays information about the managed sets of which the virtual disk is a member.managed_set_member
Displays presentation attributes for the virtual disk.presentation
SHOW SYSTEM 41