HP-UX Fibre Channel (fcd, fclp) and FlexFabric FCoE (fcoc) Host Bus Adapter Support Matrix, February 18, 2014

HP-UX Fibre Channel Host Bus Adapter support matrix Page 6 of 13
Adapter Hardware platform
Minimum system
firmware
requirements
Recommended
adapter firmware
Boot
support
Operating system
18
Driver bundle OL* support Notes
Superdome 2
Any SFW
FW 2.82X4
EFI 4.01a5
Yes HP-UX 11i v3 1009 or later
FibrChanl-02
minimum version
11i v3: B.11.31.1009
recommended version
11i v3: B.11.31.1204
Yes
Please note the following slot limitations on rx3600 and rx6600 servers:
• Slots 5 and 6 are the recommended slots for AD221A, AD222A, and
AD393A adapters.
• Slots 3 and 4 are also supported for AD221A, AD222A, and AD393A
adapters, but with the following restrictions:
- I/O performance of the card may be limited.
- Online replacement is not supported.
rx2800 i2 Any SFW
FW 2.82X4
EFI 4.01a5
Yes HP-UX 11i v3 1009 or later
FibrChanl-02
minimum version
11i v3: B.11.31.1009
recommended version
11i v3: B.11.31.1204
No
rx2800 i4 SFW 2.29
FW 2.82X4
EFI 4.01a5
Yes HP-UX 11i v3 1209 or later
FibrChanl-02
minimum version
11i v3: B.11.31.1209
No
sx2000 Integrity
Superdome
PCIe + PCI-X Hybrid
5
SFW 9.48
FW 2.82X4
EFI 4.01a5
Yes HP-UX 11i v3 0803 or later
FibrChanl-02
minimum version
11i v3: B.11.31.0803
recommended version
11i v3: B.11.31.1204
OLAR only
rx8640 PCIe + PCI-X
Hybrid
SFW 9.48
FW 2.82X4
EFI 4.01a5
Yes HP-UX 11i v3 0803 or later
FibrChanl-02
minimum version
11i v3: B.11.31.0803
recommended version
11i v3: B.11.31.1204
OLAR only
rx7640 PCIe + PCI-X
Hybrid
SFW 9.48
FW 2.82X4
EFI 4.01a5
Yes HP-UX 11i v3 0803 or later
FibrChanl-02
minimum version
11i v3: B.11.31.0803
recommended version
11i v3: B.11.31.1204
OLAR only
rx6600 PCIe + PCI-X
Hybrid
SFW 3.01
FW 2.82X4
EFI 4.01a5
Yes HP-UX 11i v3 0803 or later
FibrChanl-02
minimum version
11i v3: B.11.31.0803
recommended version
11i v3: B.11.31.1204
OLAR only
rx3600 PCIe + PCI-X
Hybrid
SFW 3.01
FW 2.82X4
EFI 4.01a5
Yes HP-UX 11i v3 0803 or later
FibrChanl-02
minimum version
11i v3: B.11.31.0803
recommended version
11i v3: B.11.31.1204
OLAR only
rx2660 PCIe + PCI-X
Hybrid
SFW 3.01
FW 2.82X4
EFI 4.01a5
Yes HP-UX 11i v3 0803 or later
FibrChanl-02
minimum version
11i v3: B.11.31.0803
recommended version
11i v3: B.11.31.1204
OLAR only
AD221A
18
PCIe Combo 1-port 4 Gb FC and
1-port 1000Base-T (copper) Adapter
AD222A
18
PCIe Combo 2-port 4 Gb FC and
2-port 1000Base-T (copper) Adapter
AD393A
18
PCIe Combo 2-port 4 Gb FC and
2-port 1000Base-SX (fiber) Adapter
(continued)
AD221A
18
PCIe Combo 1-port 4 Gb FC and
1-port 1000Base-T (copper) Adapter
AD222A
18
PCIe Combo 2-port 4 Gb FC and
2-port 1000Base-T (copper) Adapter
AD393A
18
PCIe Combo 2-port 4 Gb FC and
2-port 1000Base-SX (fiber) Adapter