Data Protector Express User's Guide (TC330-96002, October 2010)

d. The system boots from the CD or DVD.
4. If you are using a bootable tape:
a. Remove all media from all tape drives and/or library magazine slots.
b. Insert the first bootable media:
i. If you are using a single tape drive, insert the first bootable media i nto the drive.
ii. If you are using a library, insert the first (or only) bootable m e dia into slot 1 of the
magazine. If the full backup used two or more media, insert the rest of the full backup
media into the library magazine in their proper order.
c. Perform any special steps for booting your computer from the tape drive. (Refer to your system
documentation.) Most bootable d rives use a combination of power cycling and pressing the
Eject button on the front p anel. Many also require that you update the computer BIOS.
d. The system boots from the tape.
5. If your system boots and disp lays either the Disaster Recovery character screen or the Disaster
Recovery Wizard screen, your bootable media should function correctly during disaster recovery.
6. If you are using a bootable device and your system hangs during startup or your operating system
does not boot from the device, you must use a bootable CD or DVD to perform disaster recovery.
Your device is not compatible with the bootable media.
7. Select Exit and press Enter on the Disaster Recovery character screen or click Cancel on the Disaster
Recover Wiza rd screen.
8. Remov e the bootable media and restart your computer. This completes the disaster recov ery test.
Recove
ring F rom a Disaster
If disa
ster strikes and you are unable to boot your system using your normal boot procedure, use one of
the fol
lowingprocedurestorecoveryoursystem.
NOTE:
Do not restore incremental or differential backup media until after you complete disaster recovery.
There are several phases to disaster recovery and your system will be rebooted at various points in the
process. At all times, information is displayed to advise you of what is happening. The machine may
reboot on its own several times during the course of the recovery. This is normal behavior required by the
operating system to complete certain recovery steps. Normally, you are not required to take any action
other than inserting media if prompted to do so.
When recovering your system, Data Protector Express gives you the option to recover your whole system
or just the hard disk that your system b oots from. If the volumes on your boot hard disk are split am ong
multiple physical hard disks, you should recover the entire system and not just the boot disk. O therwise,
some system data may not be restored.
Disaster recovery for older Windows and Linux
This section is applicable to ...
• Windows XP,
• Windows Server 2003, and
• Linux.
User’s Guide
77