Integrating HP Data Protector 6.1 with SAN Virtualization Services Platform

22
Appendix B
In this section we will create an SVSP SANAPI virtual disk and a user for SVSP. Before we go on
to the VSM GUI you should install the VSM CLI Library on the system used (in our example the
backup host).
Figure 27: VSM CLI installation
To access the VSM GUI:
1. Connect your Internet browser to <IP address>:<Port_Number>, where <IP address> is
the IP address of the VSM server, and <Port_Number> is the TCP port number through
which the VSM server is exposed to the IP network.
2. Click “Start VSM Client”. The Login screen appears.
If this is the first time you are connecting to a specific VSM server, select Connect to
Server and enter the IP address of the VSM server in the Connect to Server field.
3. If this is not the first time you are connecting to a specific VSM server, you can
alternatively select “Connect to Domain”, and then select the VSM domain name from the
dropdown box.
4. In the “Port” field, enter the TCP port number configured as the port through which the
VSM server is exposed to the IP network.
5. If you want to connect using a secure HTTP (HTTPS) connection, check “Http is Secure”.
6. Click “OK”.