HP Data Protector 6.20 Network Attached Storage (NAS) Support Matrix

2
HP X9300
not supported
not supported
supported
supported
supported
HP X9320
not supported
not supported
supported
supported
supported
HP X9720
not supported
not supported
supported
supported
supported
For supported devices, please see the HP Data Protector 6.20 Device Support Matrix. Only those devices that are supported
by the respective NAS device and are also listed in HP Data Protector 6.20 Device Support Matrix are supported.
Includes support for all sub-models, for example, Ext. SATA Model, Ext. SCSI Model, SAN Storage Model and so on
Data Protector also supports NAS applications based on the industry standard NDMP protocol. There is a special NDMP
Media Agent in Data Protector, that addresses the special backup and recovery needs of these NDMP based NAS
applications. However, please note that Data Protector AES Encryption and key management features are not available for
NDMP Media Agent.
The following table presents details of the NAS devices supported by Data Protector via NDMP protocol
NAS applications supported by DP via NDMP protocol
Vendor
Version
Features
HP
X9000, X9300, X9320
X9720
NDMP v4
Dump
Direct Access Restore (DAR & DDAR)
SAN & direct attached devices
1
Device/Library sharing for SAN attached devices
EMC
EMC Celerra 5.6, 6.0
NDMP v3 & v4
Dump & NVB (VBB)
Direct Access Restore (DAR & DDAR)
SAN & direct attached devices
1
Device/Library sharing for SAN attached devices
EMC
EMC VNX File 7.0
NDMP v3 & v4
Dump & NVB (VBB)
Direct Access Restore (DAR & DDAR)
SAN & direct attached devices
1
Device/Library sharing for SAN attached devices
NetApp
ONTAP pre 7.3.x
2
NDMP v3 & v4
Dump
Direct Access Restore (DAR & DDAR)
SAN & direct attached devices
1
Device/Library sharing for SAN attached devices
NetApp
ONTAP 7.3.x
4,5,7,8
, 8.0.x (7
Mode), GX 10.0.3
NDMP v3 & v4
Dump & SMTape
Direct Access Restore (DAR & DDAR)
SAN & direct attached devices
1
Device/Library sharing for SAN attached devices
BlueArc
BlueArc Titan and Mercury
Series, BlueArc Operating
System 6.x, 7.x, 8.x and 10.x
firmware
NDMP v3 & v4
Dump
Direct Access Restore (DAR)
SAN & direct attached devices
1
Device/Library sharing for SAN attached devices
Hitachi
Hitachi High Performance NAS
platform 6.x, 7.x, 8.x and 10.x
Powered by BlueArc
NDMP v3 & v4
Dump
Direct Access Restore (DAR)
SAN & direct attached devices
1
Device/Library sharing for SAN attached devices
IBM
System Storage N3300 Model
A10
3
, ONTAP 7.3.2
NDMP v3 & v4
Dump & SMTape
Direct Access Restore (DAR & DDAR)
SAN & direct attached devices
1
Device/Library sharing for SAN attached devices
For supported devices, please see the device support matrices of the respective NAS vendors. Only those devices which are
supported by the respective NAS vendors and are also listed as supported in the HP Data Protector 6.20 Device Support
Matrix are supported.
Due to the supportability issues, Data Protector only supports the following sub versions of ONTAP 7.0.1:
For ONTAP 7.0.1.R1 Stream - 7.0.1R1P7D7 and for ONTAP 7.0.1.1 Stream - 7.0.1.1D4.
No such restrictions apply for ONTAP versions 7.0.5, 7.1.x or 7.2.x
This device should be configured as NetApp.
NDMP Media Copy supported on Linux 32-bit, HP-UX and Windows clients only.
Support is available with the Data Protector patch bundle
DPUXBDL_00621/DPSOLBDL_00621/DPLNXBDL_00621/DPWINBDL_00621 on top of Data Protector 6.20.
Support for Media Copy on HP-UX 11.31 IA is available with the SSP: SSPUX620_009