HP StorageWorks EBS with HP OpenView Storage Data Protector V5.1 Implementation Guide (October 2003)

Installation and Configuration
20 EBS with HP OpenView Storage Data Protector v5.1 Implementation Guide
Installing HP StorageWorks Storage Data Protector v5.1
After all components on the SAN are logged in and configured, the system is
ready for the installation of Data Protector. Refer to the HP OpenView Storage
Data Protector Installation and Licensing Guide or contact HP customer support
for detailed installation procedures and requirements.
Installing Data Protector Software
HP recommends that you install in the following order:
1. Cell Manager
2. Installation Server
3. Data Protector clients, and add-on products such as Open File Manager,
Online Database Backup, and so on
4. Any additional Data Protector add-on products
Note: HP recommends that you remove any other backup software currently
configured on your system before installing Data Protector. Other backup software, tape
device applications that are part of the OS, and SAN or system management software
can negatively affect how Data Protector installs and functions.
The Cell Manager and Installation Servers are installed directly from the CD.
After you have installed the Cell Manager and Installation Servers you can then
install the components on various client systems using the Data Protector
Installation GUI.
There are certain hardware and software requirements that need to be met by
Installation Servers and Cell Managers before you start installing the software. A
dedicated port, generally port 5555, needs to be available throughout the cell.
Refer to the HP OpenView Storage Data Protector Installation and Licensing
Guide for details.