Brocade iSCSI Gateway Service Administrator's Guide (53-1000603-01, October 2007)

iSCSI Gateway Service Administrator’s Guide 33
53-1000603-01
Committing the iSCSI-related configuration
3
Displaying CHAP configurations
You can display a list of the user names that have been set up on the fabric for iSCSI initiator
authentication.
To display iSCSI VT authentication
1. Connect and log in to the switch.
2. Enter the iscsiCfg
--show auth command as follows:
switch:admin> iscsicfg --show auth
Number of records found: 1
Name Status
username0001Defined
Committing the iSCSI-related configuration
This section explains how to save iSCSI-related configuration parameters, including iSCSI VTs,
discovery domains, discovery domain sets, and CHAP authentication, after they have been defined.
Each set of changes, additions, and deletions is called a “transaction.”
Displaying current transactions
Review the current transaction before committing the changes; once the changes are committed,
they are enforced fabric-wide.
To display transactions
1. Connect and log in to the switch.
2. Enter the iscsiCfg
--show transaction command as follows:
switch:admin> iscsicfg --show transaction
Active transaction ID is: 10490 and the owner is: CLI.
The following groups have been modified:
1. Auth. group.
2. Target/LUN group.
3. DD/DDSet group.