Brocade iSCSI Gateway Service Administrator's Guide (53-1000603-01, October 2007)

44 iSCSI Gateway Service Administrator’s Guide
53-1000603-01
Creating a zoning configuration
4
To enable a zoning configuration
1. Connect and log in to the switch as admin.
2. Enter the cfgEnable command.
3. Enter the cfgSave command to save the change to the defined configuration.
switch:admin> cfgenable iscsi_cfg001
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected.
Do you want to enable 'iscsi_cfg001' configuration (yes, y, no, n): [no] y
zone config "iscsi_cfg001" is in effect
Updating flash ...
switch:admin>