Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

98 Fabric OS Command Reference
53-1000599-01
defZone
2
primaryfcs:admin> cfgsave
An audit log record is generated for each use of this command.
--show Displays the current state of the default zone access mode
.
Notes This command requires a Brocade Advanced Zoning license.
This command must be run from the primary FCS switch.
Zone object names beginning with the d_efault_ prefix are reserved for default zoning use. Editing
of these objects is not permitted. Therefore, cfgShow does not display the names of these objects.
If d_efault_Cfg is the effective zone configuration, both cfgShow and cfgActvShow do not display
d_efault_Cfg as the effective zone configuration.
Examples To create a default zone configuration:
primaryfcs:admin> cfgactvshow
Effective configuration:
No Effective configuration
primaryfcs:admin> defzone
--noaccess
primaryfcs:admin> cfgsave
primaryfcs:admin> defzone
--show
Default Zone Access Mode
committed - No Access
transaction - No Transaction
primaryfcs:admin> cfgactvshow
Effective configuration:
No Effective configuration: (No Access)
See Also none