Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

Fabric OS Command Reference 153

53-1000599-01

fazoneDelete

Deletes a Fabric Assist mode (FA) zone.

Synopsis fazonedelete "fazonename"

Description Use this command to delete an existing Fabric Assist mode zone on a fabric.

This command does not change the defined configuration (which you can view using the cfgShow

command). For the change to become effective, it must be enabled using the cfgEnable command.

For the change to be preserved across switch reboots, it must be saved to nonvolatile memory

using the cfgSave command.

When FCS policy is enabled, this command can be issued only from the primary FCS switch.

Operands This command has the following operands:

fazonename Specify the name of the zone to be deleted, in quotation marks. This operand

is required.

Examples To delete a Fabric Assist zone:

switch:admin> fazonedelete “Blue_fazone”

See Also fazoneAdd, fazoneCreate, fazoneRemove, fazoneShow