Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

Fabric OS Command Reference 169

53-1000599-01

fcrBcastConfig

Display or set the broadcast frame forwarding option.

Synopsis frcbcastconfig --show

frcbcastconfig --enable -f fabric id

frcbcastconfig --disable -f fabric id

frcbcastconfig --help

Description Use this command to set the broadcast frame option to ON or OFF or to display the current

configuration. If no operands are specified, this command displays the current settings on the

switch.

Operands This command takes the following operands:

--show Shows the current configuration on the switch.

--enable Enables the frame forwarding option for the specified fabric ID.

--disable Disables the frame forwarding option for the specified fabric ID

-f fabric id Specifies the fabric ID to be disabled/enabled. Valid values are 1-128.

--help Displays the list of actions possible.

EXAMPLES To display the current configuration of the switch.

switch:admin> frcbcastconfig --show

Broadcast configuration is disabled for:

fid 2

fid 128

fid 33