Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

Fabric OS Command Reference 177
53-1000599-01
fcrLsanMatrix
2
--cancel Cancels the data that was not applied; reverts to the persistent information.
--fabricview Views all the static and default/dynamic fabric binding in the backbone.
--verify Verifies if the LSAN Zone information previously entered and stored in the
cache, can be successfully applied. The data is okay if the apply operation
does not cause disruption to the traffic.
--quickmode Derives the LSAN Zone matrix from the import/export setup.
Examples The backbone has the following online edge fabrics (FIDs): 1, 2, 4, 5, 7, 8, 10 (currently, 14, 19
are not available). To add the LSAN Zone Matrix data:
switch:admin > fcrlsanmatrix --add 4 5
switch:admin > fcrlsanmatrix --add 4 7
switch:admin > fcrlsanmatrix --add 10 14
switch:admin > fcrlsanmatrix --add 10 19
To remove an entry:
switch:admin > fcrlsanmatrix --remove 10 14
To display the information from the cache:
switch:admin > fcrlsanmatrix --display
Fabric ID 1 Fabric ID 2
------------------------------------
4 5
4 7
10 19
To apply the changes persistently:
switch:admin > fcrlsanmatrix --apply
To view the persistent changes:
switch:admin > fcrlsanmatrix
LSAN MATRIX is activated
Fabric ID 1 Fabric ID 2
--------------------------------------
4 5
4 7
10 19
To view the LSAN Zone static and default/dynamic binding in the backbone:
For example, in the backbone where online fabrics are:
1, 2, 4, 5, 7, 8, 10
switch:admin > fcrlsanmatrix --fabricview
LSAN MATRIX is activated
Fabric ID 1 Fabric ID 2
--------------------------------------
4 5
4 7
10 19
Default LSAN Matrix:
1 2 8