Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

Fabric OS Command Reference 231

53-1000599-01

fwClassInit

Initializes all classes under Fabric Watch.

Synopsis fwclassinit

Description Use this command to initialize all classes under Fabric Watch. The command should only be used

after installing a Fabric Watch license to start licensed Fabric Watch classes. Refer to fwConfigure

for a list of classes.

This command requires a Fabric Watch license.

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands none

Examples To initialize all classes under Fabric Watch:

switch:admin> fwclassinit

fwClassInit: Fabric Watch is updating...

fwClassInit: Fabric Watch has been updated.

See Also fwConfigReload, fwConfigure, fwShow