Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

Fabric OS Command Reference 235
53-1000599-01
fwConfigure
2
.
Not all platforms support fans or power supplies. If you attempt to configure values for these items
the following displays: "ERROR: No threshold available.
Operands This command has the following optional operands:
--enable --port portNumber
Enables all thresholds associated with a certain port.
--disable --port portNumber
Disables all thresholds associated with a certain port.
Examples To configure thresholds in Fabric OS mode:
switch:admin> fwconfigure
1 : Environment class
2 : SFP class
TABLE 13 Access Gateway Mode
Class Area
Environmental Temperature
Fan*
Power Supply*
SFP Temperature
RXP
TXP
Current
Voltage
Port Link failure
Sync loss
Signal loss
Protocol error
Invalid words
Invalid CRCs
RX Performance
TX Performance
State Changes
Fabric E_Port downs
Fabric reconfigure
Domain ID changes
Segmentation changes
Zone changes
Fabric<->QL
Fabric logins
SFP state changes
FFL_Port (Optical Same as Port class
FFL_Port (Copper) Same as Port class
Resource class Flash area
EE Performance Monitor Invalid CRCS
RX Performance
TX Performance
Filter Performance Monitor Customer Defined
Resource Flash