Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

Fabric OS Command Reference 249
53-1000599-01
fwShow
2
fwShow
Displays the class thresholds monitored by Fabric Watch.
Synopsis fwshow [--port --persistence] | [--disable --port]
Description Use this command to display the thresholds monitored by Fabric Watch. This command also
displays the port persistence time and ports with all disabled thresholds.
Notes This command requires a Fabric Watch license.
The execution of this command is subject to Admin Domain restrictions that may be in place.1
For a description of the class thresholds supported in FOS and the restrictions that apply to some
of the classes in terms of support for V/VE/VEX ports and GbE ports, refer to the help page for
fwConfigure or consult the Fabric Watch Administrator's Guide.
In Access Gateway mode, only the following class thresholds are supported. F/FL Port (Copper)
class threshold is supported only on Embedded platforms.
Operands The operands are as follows:
--port --persistence
Displays the time (in seconds) that a port must be persistently in a state
before being marked as such.
--disable --port Displays the ports that have all associated thresholds disabled.
Examples To display thresholds for a fan in the SFP class:
switch:user> fwshow
1 : Show class thresholds
2 : Detail threshold information
3 : Show port persistence time
4 : Quit
Select an item => : (1..4) [3] 1
1 : Environment class
2 : SFP class
3 : Port class
4 : Fabric class
5 : E-Port class
TABLE 14 Access Gateway mode classes
Class
Environmental
SFP
Port
Fabric
F/FL_Port (Optical)
F/FL_Port (Copper)
Resource