Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

Fabric OS Command Reference 343
53-1000599-01
msPlMgmtActivate
2
msPlMgmtActivate
Activates the Management Server (MS) platform service.
Synopsis msplmgmtactivate
Description Use this command to activate the MS platform service in the entire fabric. This command attempts
to activate the MS platform service for each switch in the fabric. If successful, the change takes
effect immediately and commits the changes to nonvolatile storage of each switch. After
successful activation, all switches in the fabric boot with the MS platform service enabled.
Notes By default, the MS platform service is disabled.
Before issuing, run the msCapabilityShow command to verify all switches in the fabric support MS
platform service; otherwise, the command fails.
When FCS policy is enabled, this command can be issued only from the primary FCS switch.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To activate the MS platform service:
switch:admin> msplmgmtactivate
Request to activate MS Platform Service in progress......
*Completed activating MS Platform Service in the fabric!
See Also msCapabilityShow, msPlatShow, msPlClearDB, msPlMgmtDeactivate