Manualshelf

Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

ManualsBrandsHP ManualsComputer AccessoriesHP DC SAN Director Switch Multiprotocol Extension Blade Option
371372373374375376377378379380
346 Fabric OS Command Reference
53-1000599-01
msTdEnable
2
msTdEnable
Enables the Management Server (MS) topology discovery service.
Synopsis mstdenable ["ALL"]
Description Use this command to enable the MS topology discovery service on a local switch or on the entire
fabric. This command enables the MS Topology Discovery Service. This change takes effect
immediately and commits to the configuration database for all affected switches.
If the operand "ALL" is used, this command attempts to enable the MS topology discovery service
on all switches in the fabric.
Notes When FCS policy is enabled, and this command is issued with the "ALL" operand, it can be issued
only from the primary FCS.
This command is supported only in AD0 and AD255 contexts.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Limitations Topology Discovery Management requires the attached devices which include attached switches to
support RNID ELS.
Operands This command has the following operand:
"ALL" Enables the MS topology discovery service throughout the entire fabric. This
operand is optional.
Examples To enable the MS topology discovery service on the local switch only:
switch:admin> mstdenable
Request to enable MS Topology Discovery Service in progress....
done.
*MS Topology Discovery enabled locally.
To enable MS topology discovery on all the switches in the fabric:
switch:admin> mstdenable "ALL"
Request to enable MS Topology Discovery Service in progress....
done.
*MS Topology Discovery enabled locally.
*MS Topology Discovery Enable Operation Complete!!
See Also msTdDisable, msTdReadConfig