Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

Fabric OS Command Reference 23
53-1000599-01
ag
2
11 0x6d0c01 10:00:00:06:2b:0a:a3:92 2 0
12 0x6d0d02 10:00:00:06:2b:0a:a3:91 3 1
13 0x6d0d01 10:00:00:06:2b:0a:a3:90 3 1
---------------------------------------------------------
2. To display the current Access Gateway mode:
switch:admin> ag --modeshow
Access Gateway mode is enabled.
switch:admin> ag --modeshow
Access Gateway mode is NOT enabled.
AG group policy commands
1. To show current policies:
switch:admin> ag --policyshow
Policy_Description Policy_Name State
------------------------------------------------------------------
Port Grouping pg Enabled
Auto Port Configuration auto Disabled
------------------------------------------------------------------
switch:admin> ag --policyshow
Policy_Description Policy_Name State
------------------------------------------------------------------
Port Grouping pg Disabled
Auto Port Configuration auto Enabled
------------------------------------------------------------------
2. To enable a port grouping policy:
switch:admin> ag --policyenable pg
3. .To disable a port grouping policy
switch:admin> ag --policydisable pg
4. To enable auto policy when both policies are disabled and switch is already disabled:
switch:admin> ag --policyeanble auto
All Port related configurations will be lost.
Please save the current configuration using configupload.
Do you want to continue? (yes, y, no, n): [no] y
5. To disable auto policy when switch is disabled:
switch:admin> ag --policydisable auto
Default factory settings will be restored.
Default mappings will come into effect.
Please save the current configuration using configupload.
Do you want to continue? (yes, y, no, n): [no] y
Access Gateway configuration has been restored to factory default