Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

Fabric OS Command Reference 29

53-1000599-01

agshow

To display all Access Gateways attached to the fabric:

switch:admin> agshow

Worldwide Name Ports Enet IP Addr Firmware Local/Remote Name

----------------------------------------------------------------------------------------------

10:00:00:05:1e:02:b7:2c 16 10.32.173.62 v6.0.0 remote L5D2_B10_4016_1

10:00:00:05:1e:04:06:ae 24 10.32.173.64 v6.0.0 local L5D2_B14_4024_1

10:00:00:05:1e:35:10:69 16 10.32.173.51 v6.0.0 remote L5D2_B13_200_AG

Notes NPIV capability should be enabled on the ports connected to the Access Gateway. Use

portCfgNPIVPort to enable NPIV capability on the specific port