Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

Fabric OS Command Reference 559
53-1000599-01
secPolicyDump
2
secPolicyDump
Displays all members of existing security policies.
Synopsis secpolicydump [“listtype”][, “name”]
Description Use this command to display, without page breaks, the members of an existing policy in the active
and defined (saved) databases.
This command can be issued from all FCS switches in the fabric.
Operands This command has the following operands:
“listtype” Specify the database to display. The name for an active database is "Active";
the name for a saved, defined database is "Defined". If not specified, all
databases are displayed.
“name” Specify the a security policy. Valid values for this operand are:
• DCC_POLICY_nnn
• FCS_POLICY
• SCC_POLICY
The specified policy name must be capitalized.
The DCC_POLICY_nnn name has the common prefix DCC_POLICY_ followed
by a string of user defined characters. These characters do not have to be
capitalized like regular policy names.
This operand is optional.
Examples To display all security policy information from all databases (active, updating, and defined), without
page breaks:
switch:admin> secpolicydump
______________________________________________________
DEFINED POLICY SET
FCS_POLICY
Pos Primary WWN DId swName
______________________________________________________
1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs
2 No 10:00:00:60:69:30:1e:62 4 switch
_______________________________________________________
_____________________________________________________
ACTIVE POLICY SET
FCS_POLICY
Pos Primary WWN DId swName
________________________________________________________
1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs
2 No 10:00:00:60:69:30:1e:62 4 switch
_______________________________________________________
See Also secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDelete,
secPolicyRemove, secPolicySave, secPolicyShow