Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

586 Fabric OS Command Reference

53-1000599-01

slotShow

Displays the status of all slots in the system.

Synopsis slotshow [-m] [-p]

Description Use this command to display the current status of each slot in the system. Depending on the option

used, the command retrieves information on Blade Type, Blade ID, Status, Brocade Model Name,

and power usage for each slot in the switch or chassis.

When no operand is specified, slotShow displays Blade Type, Blade ID, and Status for each slot. In

this view, the fields and their possible values are as follows:

Slot Displays the physical slot number.

Blade Type Displays the blade type as one of the following:.

SW BLADE The blade is a switch.

CP BLADE The blade is a control processor.

CORE BLADE The blade is a core switch blade.

AP BLADE The blade is an application processor.

UNKNOWN Blade not present or its type is not recognized.

ID Displays the blade type ID as one of the following:

16 CP4 control processor blade

17 FC4-16 port blade

18 FC4-32 port blade

24 FR4-18i port blade

31 FC4-16IP port blade

33 FA4 -18 port blade

36 FC4-48 port blade

39 FC10-6 port blade

50 CP8 control processor blade

52 Core8 switch blade

37 FC8-16 port blade

55 FC8-32 port blade

51 FC8-48 port blade

Status Displays the status of the blade as one of the following:

VACANT The slot is empty.

INSERTED, NOT POWERED ON

The blade is present in the slot but is turned off.

POWERING UP The blade is present and powering on.

LOADING The blade is present, powered on, and loading the initial configuration.