Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

616 Fabric OS Command Reference
53-1000599-01
supportShowCfgEnable
2
supportShowCfgEnable
Enables a group of commands to be displayed under the supportShow command.
Synopsis supportshowcfgenable os | exception | port | fabric | services | security | network | portlog |
system | extend | filter | perfmon | ficon | iswitch | asic_db
Description Use this command to enable a group of commands to be displayed under the supportShow
command. Use the supportShowCfgDisable command to disable groups of commands.
Refer to Chapter 6, “supportShow Reference”, for more information.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
os Enables the OS group commands
exception Enables the exception group commands
port Enables the port group commands
fabric Enables the fabric group commands
services Enables the service group commands
security Enables the security group commands
network Enables the network group commands
portlog Enables the portlog group commands
system Enables the system group commands
extend Enables the extend group commands
filter Enables the filter group commands
perfmon Enables the Performance Monitor group commands
ficon Enables the FICON group commands
iswitch Enables the FC Router group commands
asic_db Enables the ASIC DB group commands
iscsi Enables the ISCSI group commands
Examples To enable a group of commands under the supportShow command:
switch:admin> supportshowcfgenable os
Config update Succeeded
See Also supportShow, supportShowCfgDisable, supportShowCfgShow