Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

Fabric OS Command Reference 639

53-1000599-01

switchViolation

Dumps DCC violation on a switch.

Synopsis switchViolation --dump -dcc

Description Use this command to display Device Connection Control (DCC) violations on a switch. Internally

the command searches "errdumpall" for the DCC violations. For each DCC violation, the command

displays the device WWN and the port where the violation occurred.

Operands This command has the following operands. If executed without operands, the command prints the

usage.

--dump Displays specified policy violation.

-dcc Specifies the violation type as DCC.

Notes This command can be executed on both active and standby CP. This command does not support

HA.

Examples To display DCC violations on a switch:

switch:admin> switchviolation --dump -dcc

Device WWN Port

-----------------------------------

22:00:00:04:cf:75:59:87 10