Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

696 Fabric OS Command Reference
53-1000599-01
Primary FCS Commands
3
fazoneDelete Must be run from the primary FCS switch.
fazoneRemove Must be run from the primary FCS switch.
fazoneShow Can be run on all switches.
msPlClearDB Must be run from the primary FCS switch.
msPlMgmtActivate Must be run from the primary FCS switch.
msPlMgmtDeactivate Must be run from the primary FCS switch.
msTdDisable msTdDisable “ALL” must be run from the primary FCS switch.
msTdEnable msTdEnable “ALL” must be run from the primary FCS switch.
secPolicyAbort Must be run from the primary FCS switch.
secPolicyActivate Must be run from the primary FCS switch.
secPolicyAdd Must be run from the primary FCS switch.
secPolicyCreate Must be run from the primary FCS switch.
secPolicyDelete Must be run from the primary FCS switch.
secPolicyDump Can be run on all FCS switches.
secPolicyFCSMove Must be run from the primary FCS switch.
secPolicyRemove Must be run from the primary FCS switch.
secPolicySave Must be run from the primary FCS switch.
secPolicyShow Can be run on all FCS switches.
snmpConfig Can be run on all FCS switches.
tsClockServer Can be run on all switches to view the NTP server's IP address. You can only
modify the NTP server's IP address on the primary FCS switch.
zoneAdd Must be run from the primary FCS switch.
zoneCreate Must be run from the primary FCS switch.
zoneDelete Must be run from the primary FCS switch.
zoneObjectCopy Must be run from the primary FCS switch.
zoneObjectExpunge Must be run from the primary FCS switch.
zoneObjectRename Must be run from the primary FCS switch.
zoneRemove Must be run from the primary FCS switch.
Command Description