Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

Fabric OS Command Reference 697
53-1000599-01
Chapter
4
Control Processor Commands
This chapter lists the commands available when logged in to the standby CP on a Brocade 48000
or DCX Data Center Backbone director. The full set of commands for your user role are available to
the active CP.
Commands Supported on the Standby CP
The following commands are supported when logged into the standby CP.
TABLE 22 Commands Supported on the Standby CP
Command Description
cliHistory Displays a log of most recently executed CLI commands
date Displays or sets the system date and time.
dbgShow Displays current values of debug and verbosity levels of the specified module.
errClear Clears error log.
errDump Displays error log (no page breaks).
errModuleShow Displays all the defined error log modules.
errShow Displays error log.
fastboot Reboots this switch, bypassing POST.
firmwareCommit Commits firmware to nonvolatile memory.
firmwareDownload Downloads firmware onto switch.
firmwareDownloadStatus Displays the progress and status of a firmware download.
firmwareKeyShow Manage the keys used to check firmware signatures.
firmwareKeyUpdate Manage the keys used to check firmware signatures
firmwareRestore Restores the old firmware in the switch.
firmwareShow Displays firmware versions in the switch.
h Displays shell history.
haDump Dumps High Availability debug data.
haShow Displays High Availability status.
help Displays this list.
ifModeSet Sets the link operating mode for a network interface.
ifModeShow Displays the link operating mode for a network interface.
killTelnet Terminates telnet/serial login sessions interactively.
login Logs in as new user.
logout Logs out from a telnet, rlogin, or serial port session.