Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

56 Fabric OS Command Reference
53-1000599-01
cfgDelete
2
cfgDelete
Deletes a zone configuration.
Synopsis cfgdelete "cfgName"
Description Use this command to delete a zone configuration.
This command changes the defined configuration. For the change to be preserved across switch
reboots, it must be saved to nonvolatile memory using the cfgSave command. For the change to
become in effect, an appropriate zone configuration must be enabled using the cfgEnable
command.
Notes This command requires a Brocade Advanced Zoning license.
When FCS policy is enabled, this command can be issued only from the primary FCS switch.
Operands This command has the following operand:
"cfgName" Specify a name for the zone configuration to be deleted, in quotation marks.
This operand is required.
Examples To delete a zone configuration:
switch:admin> cfgdelete “USA_cfg”
See Also cfgAdd, cfgClear, cfgCreate, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow