Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

Fabric OS Command Reference 57

53-1000599-01

cfgDisable

Disables a zone configuration.

Synopsis cfgdisable

Description Use this command to disable the current zone configuration. The fabric returns to non-zoning

mode, in which all devices see each other.

This command ends and commits the current zoning transaction buffer to both volatile and

nonvolatile memory. If a transaction is open on a different switch in the fabric when this command

is run, the transaction on the other switch is automatically aborted. A message is displayed on the

other switches to indicate the aborting of the transaction.

If the default zone access mode is “No Access”, then this command becomes cfgEnable

“d_efault_Cfg”. See defZone.

Notes This command requires a Brocade Advanced Zoning license.

When FCS policy is enabled, this command can be issued only from the primary FCS switch.

Operands none

Examples To disable the current zone configuration:

switch:admin> cfgdisable

You are about to disable zoning configuration. This

action will disable any previous zoning configuration enabled.

Do you want to disable zoning configuration? (yes, y, no, n): [no] y