Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

Fabric OS Command Reference 73

53-1000599-01

cliHistory

Name clihistory - displays switch command history.

Synopsis clihistory

Description This command saves the following information whenever a command is executed on the switch:

• Timestamp

• Username

• IP address of the telnet session

• Options

• Arguments

This command can be executed on the Active CP and the standby CP(s) and displays the local CLI

command history.

The information is saved as part of supportSave as the CH file. It is also saved persistently to

compact flash if the goes in panic mode.

The maximum number of saved entries for this command is 512.

Operands None

Examples To display the command history on a switch:

switch:admin> clihistory

Command History:

09:14:17.6924 1 admin, 192.168.163.233, version

10:25:36.8875 1 admin, 192.168.100.19, clihistory

12:05:40.3492 1 admin, 192.168.100.19, help | more

12:05:46.2940 1 admin, 192.168.100.19, switchshow

12:06:05.4138 1 admin, 192.168.100.19, help - switchshow

12:06:17.7643 1 admin, 192.168.100.19, slotshow

12:06:27.6852 1 admin, 192.168.100.19, clihistory

12:06:56.3138 1 admin, 192.168.100.19, aaaconfig --show

12:07:17.8312 1 admin, 192.168.100.19, clihistory

12:09:28.7144 1 admin, 192.168.100.19, aaaconfig \

--add 194.72.68.335 -conf ldap

12:09:35.0275 1 admin, 192.168.100.19, clihistory

12:10:05.6848 1 admin, 192.168.100.19, aaaconfig \

--move radserver -conf radius 1