Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

15-6 Web Tools Administrator’s Guide
Publication Number: 53-0000194-01
15
Launching the iSCSI Target Gateway Admin
Module
The iSCSI button in the Switch View launches the iSCSI Target Gateway Admin module. This button is
displayed only for the SilkWorm 48000 director with an FC4-16IP inserted.
The Target Group is the first pane that comes up and presents all the iSCSI virtual targets and their
mapping to the Fibre Channel targets (physical and virtual) from the fabric. You can create and add
LUNs to the existing iSCSI virtual targets from this group.
When you select an IQN you have the ability to edit or delete virtual targets associated with that IQN.
You can view current sessions and discovery domain accessibility.
Figure 15-2 iSCSI Target Gateway Admin Module with the Targets Tab Selected
To launch the iSCSI Target Gateway Admin module
1. Select a switch from the Fabric Tree.
2. Log in to the switch (see “Logging In” on page 1-13.)
The selected switch appears in the Switch View.
Make sure that your Admin Domain Context is either AD0 or AD255.
N
ote
Since the entire fabric is scanned when you click the iSCSI button in this module, larger fabrics may
take longer to load.